INNERPRO-36-40L
Solette interne - Pro
Size Charts
Bont Rowing EU | 36 | 37 | 38 | 39 | 40 | 40.5 | 41 | 42 | 42.5 | 43 | 44 | 44.5 | 45 | 46 | 46.5 | 47 | 48 | 49 | 50 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bont Rowing USA | 4 | 4½ | 5 | 6 | 6½ | 7 | 7½ | 8 | 8½ | 9 | 9½ | 10 | 10½ | 11 | 11½ | 12 | 12½ | 13 | 14 |
Foot Length Range (mm) | 216-220 | 221-225 | 226-230 | 231-235 | 236-240 | 241-245 | 246-250 | 251-255 | 256-260 | 261-265 | 266-270 | 271-275 | 276-280 | 281-285 | 286-290 | 291-295 | 296-300 | 301-305 | 306-310 |
Running Shoes Men (Nike) | - | - | - | - | 6 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 12.5 | 13 | 13.5/14 |
Running Shoes Women (Nike) | - | 4 | 5 | 6 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 12.5 | 13 | 13.5 | 14/15 |
For sizes that fall outside of our size chart, please get in touch HERE.
IMPORTANT
Be advised all measurements shown in the size chart above are listed in millimetres and refer to all current models purchased after 2015.
NEW SIZING METHOD
To find your Bont Rowing shoe size, download and print our all-new sizing page in US Letter or A4 and follow the instructions exactly as listed. Mark with a straight edge your longest toe and widest part of your foot. Double check the length and width with a ruler to confirm your measurements. Be advised, this is a newly developed sizing page so please send any feedback to our team by clicking the red 'speech bubble' in the corner of the page.
ORIGINAL SIZE METHOD
To find your size, place a piece of paper on a flat surface and place it directly up against a wall.
Stand on the paper and ensure you have a 1mm gap between your heel and the wall.
Plant your foot firmly on the ground and slowly roll your weight forward onto your forefoot until it reaches an angle of approximately 45-degrees. This position mimics the angle at the catch in a boat. Look down and take the measurement from the wall edge of the paper to your longest toe. Record the length.
Use a ruler to measure the length for each foot. Take these measurements and input them into the sizing wizard or reference the Foot Length Range sizing on the size chart.
The Last Length measurements shown on the chart are the exact length of the last that we use to build the shoes. This correlates to the precise internal measurement of the shoe.
Keep in mind the length of a foot will extend slightly when at the catch. It is for this reason the foot measurement must be taken at its longest point with foot at 45-degree angle.
Si abbina bene con
Prodotta in collaborazione con i principali esperti ortotici sportivi dell'Australia Cobra9, la nostra nuova gamma di solette interne Standard e Pro offre un ancor migliore avampiede attraverso un supporto su misura per i tuoi piedi.
Progettate e prodotte in Australia e appositamente sagomate sul profilo unico (a forma di piede) delle nostre scarpe, le solette interne Standard sono state create per ogni canottiere di ogni abilità.
Realizzate per resistere all'ambiente duro sull'acqua, le solette interne Standard presentano un'anima in carbonio avvolta da resistente schiuma EVA a doppia densità per una calzata più comoda, di supporto e controllata con un miglior trasferimento di potenza.
Offerte in tre altezze dell'arco plantare; basso, medio e alto, le solette interne Standard di Cobra9 distribuiscono in modo più uniforme la pressione massima sull'avampiede per una maggiore stabilità e il mantenimento corretto del tracciamento del ginocchio durante l'intera fase della pedalata. La distribuzione del carico su una superficie più ampia aiuta anche a ridurre i punti caldi e il disagio che possono presentarsi a causa di un insufficiente supporto dell'arco del piede.
Ogni set di solette interne include anche domi metatarsali per sostenere l'arco trasversale e cunei per l'avampiede per un adeguamento individuale del volume della scarpa nella zona dell'avampiede.
Non sei sicuro di quale altezza dell'arco plantare ti serve? Le informazioni di seguito sono un ottimo punto di partenza, tuttavia è meglio prendere questa decisione in base alle tue esigenze specifiche:
- Arco piatto in posizione eretta = soletta interna con arco basso
- Arco piatto in posizione eretta, appare quando sei seduto - soletta interna con arco medio
- L'arco è vicino ma non tocca il suolo in posizione eretta - soletta interna con arco medio
- L'arco è alto rispetto al suolo in posizione eretta - soletta interna con arco alto